Switch It Attenuate It Mute It Touch It

FlipTwistPushTouch is the big sibling of our series of passive 1U eurorack modules – we took some of our favorite tools and put them all into one:

+ Switchertine
+ Attenulos
+ Pushit (doesn’t exist in our 1U line – yet!)
+ Jangler

Right at the top is the switch. Use this to route one input between two outputs – or vice versa – two inputs to one output. The switch is 3 pole, with the center pole acting as a mute functionality. Read about Switchertine to find out more.

Below that is the attenuator. Just a simple knob to control how much of a signal flows between the input and output. Read about Attenulos to find out more.

Below that is the push button. A really satisfying button that routes one signal to two outputs with inverse characteristics. The left output is muted unless you push the button. The right output is always on and only muted when you push the button.

At the bottom are two touch plates. Each jack is connected directly to the touchplate next to it. Simply touch both touchplates to create a connection. Your body becomes a cable! How hard you push will change how much of the signal goes through – so you can create nice gestures controlling things like volume or CV level! This section works just like the Jangler 3U / Jangler 1U – and can connect to these if you already have them in your rack. Alternatively, you could use two FlipTwistPushTouches to create a Jangler!

The touch section can connect to our Jangler 3U or Jangler 1U! Or if you have multiple FlipTwistPushTouches then you can use them together as if they were a Jangler.

Specs

Height: 3U
Width: 6HP